The leather used on this shirt is made of hides from deers living in the woods and mountains of Germany and Austria. They are not kept as livestock or in barns like cows, they run free through the woods and hills. Many of the hides will show scars which are a byproduct of the antlered males fighting with one another during the rutting season.
These animals are smaller than cows resulting in smaller hides. Usually, the younger and smaller ones are selected because the meat is easier to use. It is therefore difficult to get larger pieces of leather without any scars.
The tanning method is an old and traditional process known as Sämischgerbung. The tannery making the hides for Iron Heart is the last one in Germany and there are only a few others left in Austria. Tanning this way is enormously labour-intensive and time-consuming. The result of this tanning process is a super soft and hard-wearing leather, that bears the unique characteristics of how the deer lived its life.
The tanning results in a beige-coloured leather (you can see it on the inside of the shirts). The natural dyes are applied to the surface several times by hand with brushes. The leather is not dip-dyed, the colour is only on the surface and the leather does not absorb the dye consistently leading again to a sometimes uneven result. From the starting point with the tanning process to the final leather, it takes at least one year.
This is not just leather, it is a cultural heritage which just like traditional Japanese indigo dyeing, presents a distinctive tone of individuality within each dyed hide, so although we have tried to select the tanned hides that are as close in colour to one another as possible, there will always be some variance.
Deerskin Western Shirt 'The Big Buck' - Olive
IHSB-BIGBUCK-OLV Seasonal or Limited Run
$1,500
No tax
The leather used on this shirt is made of hides from deers living in the woods and mountains of Germany and Austria. They are not kept as livestock or in barns like cows, they run free through the woods and hills. Many of the hides will show scars which are a byproduct of the antlered males fighting with one another during the rutting season.
These animals are smaller than cows resulting in smaller hides. Usually, the younger and smaller ones are selected because the meat is easier to use. It is therefore difficult to get larger pieces of leather without any scars.
The tanning method is an old and traditional process known as Sämischgerbung. The tannery making the hides for Iron Heart is the last one in Germany and there are only a few others left in Austria. Tanning this way is enormously labour-intensive and time-consuming. The result of this tanning process is a super soft and hard-wearing leather, that bears the unique characteristics of how the deer lived its life.
The tanning results in a beige-coloured leather (you can see it on the inside of the shirts). The natural dyes are applied to the surface several times by hand with brushes. The leather is not dip-dyed, the colour is only on the surface and the leather does not absorb the dye consistently leading again to a sometimes uneven result. From the starting point with the tanning process to the final leather, it takes at least one year.
This is not just leather, it is a cultural heritage which just like traditional Japanese indigo dyeing, presents a distinctive tone of individuality within each dyed hide, so although we have tried to select the tanned hides that are as close in colour to one another as possible, there will always be some variance.
- Made in Scotland by Simmons Bilt
- Western shirt (but it is really almost a jacket)
- Naturally tanned deerskin
- Hand-painted black dye on face (as this is a manual process there may be some variance in colour to that pictured)
- Tonal stitching
- Iron Heart oversized copper snaps
- Western-style flap patch pockets with snap fastenings
- Snaps on cuff placket
- Single, double and triple needle stitch construction
- Black satin lined yoke
- Ageing back to the original colour will occur in high wear areas
- When the face of the hide is painted, some of the paint transfers to the rear, so there will be paint streaks on the inside of the shirt
- There is scarring to the hides, we try to avoid as much as we can, but there may be small imperfections in the hide - if you can't embrace the perfection-is-in-the-imperfections, then this shirt is not for you
- Model Johnny wears Large
- To see what size the crew wear, click here
All measurements are specific to this product. The best way to determine the size you need is to find a similar item that fits you well, then measure the same way we do (see “How We Measure” tab) and compare with the measurements in the chart below. Actual measurements for the same Iron Heart item/tag size can vary somewhat so if a specific dimension is important to you (for example arm length) please ask us to check this before we ship by adding a note to your order. Measurements for raw denim garments are pre-soak (allowance must be made for shrinkage).
Inches
| Tag Size | XS | S | M | L | XL | XXL | XXXL | XXXXL |
|---|---|---|---|---|---|---|---|---|
| Shoulders | 17.1 | 17.5 | 17.8 | 18.3 | 18.8 | 19.3 | 20.0 | 20.6 |
| Length | 30.0 | 30.5 | 30.7 | 30.8 | 31.1 | 31.4 | 31.5 | 31.8 |
| Chest (P2P) | 19.7 | 20.2 | 21.0 | 22.4 | 23.5 | 24.8 | 25.7 | 26.7 |
| Waist | 18.1 | 19.1 | 20.5 | 21.4 | 22.3 | 23.2 | 24.0 | 25.0 |
| Opening | 18.5 | 19.4 | 20.6 | 21.8 | 22.8 | 23.6 | 24.7 | 25.5 |
| Sleeve | 26.2 | 26.8 | 27.0 | 27.3 | 27.4 | 27.5 | 28.0 | 28.0 |
| Sleeve Opening | 4.4 | 4.5 | 4.6 | 4.7 | 4.8 | 4.9 | 5.0 | 5.1 |
You may need to move the above table left or right to see more sizes.
To view a step-by-step image guide, click here